About Click Click

Click Click · 01-27-2015

Hellowe have several CUCM clusters all linked via ICT's and all bar 1 will return a call cannot be completed as dialled if a user dials the correct site id (XXX) but an invalid or unused 4 digital extension number.the 1 that does not work will re rou...

Click Click · 09-02-2014

HelloCan anyone shed some ligh on a problem im having. We have setup a ASA 5505 with an ISP called Zen that allocates you a subnet of public ip addresses. i have sucessfully setup the asa to access the internet using nat on the outside interface. we...

Click Click · 08-10-2014

HelloIm having a problem with inside hosts access the internet. Setup is Internet --> VDSL Router 192.168.1.1 --> Cisco ASA 5505 192.168.1.2 = inside network 192.168.200.0/24 hosts on the internet can get to my ftp server located on the inside networ...

Click Click · 01-16-2013

System version: 7.1.3.32900-4HelloWe have recently setup a h.323 gateway to a remote site and calls are flowing to/from the remote site via the WAN. I have now attempted to setup AAR however this doesn't work, Can you help?I am setting the remote loc...

Click Click · 01-28-2015

helloall my route patterns over ict's have a backup route to prefix the national/int dial code and to route out of the pstn in case of a wan outage.the promblem im have on just this one link is that if i dial a valid dn the call goes over the ict and...

Click Click · 09-03-2014

thank you for the reply and the info, i have now got it working :)

Click Click · 09-03-2014

thank you for the advice, this is now working. using the telnet test worked and i was baffled not being able to ping the ip when that would never be possible. thank you agian c.

Click Click · 09-03-2014

Hellothe version is Cisco Adaptive Security Appliance Software Version 9.2(2)4debugging icmp i see pings to the .46 address however i see no pings/traffic received on the asa for the other addresses. how does zen know to route the xx.xx.xx.41 to .45 ...

Click Click · 08-16-2014

thank you for the reply and it was a nat issue. is it possibler to nat on the vdsl router for networks that are a hop or 2 away? is that a way to avoid natting on the asa in this senario?

Member Since	‎01-16-2013 03:23 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	13

User Statistics

User Activity

Calls to invalid extension over an ICT reroute via the backup pstn.

ASA5505 SOHO public ip range and nat head ache

ASA 5505 new install and inside hosts cannot access the internet

New AAR Config not working

helloall my route patterns

thank you for the reply and

thank you for the advice,

Hellothe version is Cisco

thank you for the reply and