About petebanning

petebanning · 07-17-2019

We are migrating our wireless network from autonomous to Mobility Express. We currently have 14 Cisco Aironet 1602e access points running in autonomous mode. We have 8 Cisco Aironet 1852e access points running Mobility Express (2 act as the WLC). I k...

petebanning · 08-29-2016

I have a clinic across town that I'm connecting to our hospital via Metro-E and I'd like to segment them off. We use a 10.1.0.0/22 scheme for our hospital. I'd like to segment the clinic into a class C using a Cisco 2600. It does hand out DHCP add...

petebanning · 08-31-2016

Thank you!

petebanning · 08-29-2016

Ping failed to the addresses when using 192.168.10.1 (f0/1) as a source.

petebanning · 08-29-2016

f0/0 is plugged into a L2 switch (I am testing this internally before moving it to the clinic). I can ping f0/0 successfully from the laptop. The laptop address is 192.168.10.6. I can ping 10.1.2.1, 10.1.2.40, 10.1.2.56 and 192.168.10.6 from the rout...

petebanning · 08-29-2016

Hello. f0/0 is plugged into a Catalyst 2960 switch on our network (IP is 10.1.2.103). f0/1 is plugged into a laptop for testing (received 192.168.10.6). I cannot ping any of the addresses from the laptop. I can ping 10.1.1.2 (f0/0) from a differen...

Member Since	‎08-29-2016 08:54 AM
Date Last Visited	‎07-24-2019 02:49 AM
Posts	8

User Statistics

User Activity

Autonomous to Mobility Express

DHCP works, but cannot access Internet - Cisco 2600

Thank you!

Ping failed to the addresses

f0/0 is plugged into a L2

Hello.