About ZainChaudhry

ZainChaudhry · 11-08-2021

Hi team,I have a stack of three C9300 switches including 2x48port and 1x24port. Now I want to upgrade the software version from 16.x.x to 17.x.x. On the Cisco Software download, the software is different for 48 port and 24 port switches.Can someone p...

ZainChaudhry · 07-29-2021

Hi guys, I have a scenario in the data centre where I have catalyst c9300 connected to the firewall. Two ports on c9300 are on port-channel LACP active mode where the ports on the firewall are LACP passive. I am seeing packets dropped on one of the s...

ZainChaudhry · 11-09-2021

HI Leo,Does this mean that I only have to download the firmware for 17.x.x for C9300 48T and it will work on the whole stack? No need to separately install for 24port switch? Thanks,

ZainChaudhry · 08-11-2021

HI Rasmus,I have set the load-balancing to src-dst-mixed-ip-port and it has resolved the issue. Thanks a lot for your help.

ZainChaudhry · 08-11-2021

HI Georg, I have set the load-balancing to src-dst-mixed-ip-port and it resolved the issue. Traffic seems to be load balanced equally now with no packet drops. Thanks a lot

ZainChaudhry · 08-01-2021

Hi Rasmus,the switch is only doing L2 and no routing. Can I still use src-dst-mixed-ip-port?? thanks

ZainChaudhry · 07-31-2021

HI Leo, Thanks for your suggestions. I have one more question though. I have just cleared the counters on both the interfaces at the same time and please see the output of show interfaces below: GSUISW01#sh interfaces gigabitEthernet 1/0/3GigabitEthe...

Member Since	‎07-29-2021 07:27 PM
Date Last Visited	‎12-15-2021 12:43 AM
Posts	14

User Statistics

User Activity

Upgrading C9300 switch stack 2x48 Port and 1x24 Port

Packets dropped on port-channel c9300

Re: Upgrading C9300 switch stack 2x48 Port and 1x24 Port

Re: Packets dropped on port-channel c9300

Re: Packets dropped on port-channel c9300

Re: Packets dropped on port-channel c9300

Re: Packets dropped on port-channel c9300