Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Gary,You should also check out this doc. It provides several sample configurations that involve a DMZ.PIX/ASA 7.x: Enable Communication Between Interfaceshttp://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807fc191.shtml...
SFTP is not supported through the PIX.This is because with SFTP the whole exchange is encrypted. This means that the PIX can't inspect the communications on the control channel (PORT or PASV, specifically) that dictate what the data channel is going...
In addition to the suggestion by mmorris, the "group-lock" command is available:http://www.cisco.com/en/US/customer/products/ps6120/products_command_reference_chapter09186a008063f0e6.html#wp1682701Thanks,Matt
It turns out that this error occurs when the client machine has two network adapters and one does not have an IP address. Bug CSCsg03979 has been opened on the issue. If you are a registered customer with a valid service contract, you can view the ...
Actually, I got Local LAN Access to work today on one machine. I tried connecting it to both an ASA running 7.2 and a VPN3k running 4.7 using excludespecified and an ACL of 0.0.0.0 255.255.255.255 (all 0s on the 3k).That said, it failed to work and ...
