Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to setup a VPN client into our network. I have a PIX 515 with 6.2(2) level of software. I have an NT 4.0 Domain with Radius. I can connect from the Internet and see the network, but I can only access the data on the Domain Server. No ...
When trying to access the web server on the DMZ, all internal addresses go the the outside connection and use the outside IP address instead of going straight to the DMZ using the address on the DMZ. The browser is not able to find the real IP addre...
We have a PIX 515 with 6.2(2). Have an Outside, Inside, and DMZ interface. We need to block specific ip addresses from the outside but not to the DMZ. The DMZ has our web server, but we cannot allow the specific IP address to access the Interent. ...
What I want to accomplish, is to use RADIUS to authenticate users to the Inernet. I don't want all users to access the Internet, only a portion of them. I'm using a Pix 515 with 6.2 software. I have RADIUS installed on our NT 4.0 PDC. What I ne...
I just installed the third ethernet port for a dmz on our PIX 515 (6.2). That install went fine and I have put a web server on the dmz. I want to access the web from the dmz to get fixes but any system on the dmz will not access the web. I thought...
We are using Radius on NT, the PDC.Honestly, not sure if we have a split tunnel?Result of firewall command: "show crypto ipsec sa" interface: outside Crypto map tag: outside_map, local addr. outsideI was speaking with a friend that has more experi...
Thanks for the info. How do I get ACS? We are a pretty small shop and I am doing the basic PIX Firewall configurations and I am not familiar with ACS. I looked on Cisco's site and found some info, but not on actually geting ACS.I have NT 4.0, what...
is the default gateway of the web server pointing to the ip address of the dmz interface of the firewall? - Yesis DNS correctly configured on the web server? No they were not. I had to call our Internet provider for the addresses. I plugged in ...
Here you go. I took out some pdm location and fixup statements and some others. If they are necessary, let me know and I'll paste them in.Thanks for your time.namesname 172.31.253.250 webpager lines 24interface ethernet0 autointerface ethernet1 aut...
