Hi,I'm interested in throttling/restricting the bandwidth on a particular interface on an IE-4000-8T-4G-E running IOS 15.2(4)EA9.Previously when using Cisco 2960 based hardware we've used, "srr-queue bandwidth limit" as the method for speed restricti...

Hi,I've have 2 SD cards for an IE4000. One which came with the switch which has the IOS bin on it as well as my config. The second card was ordered as a spare/brand new SD card and came blank/empty.Both cards have had the exact same configuration run...

Hi All,Not sure if this is the correct discussion board however....Are there nominal timing values provided in any of the Cisco product data sheets etc... which state the processing/cycle time of the switch hardware, e.g.How long does it take a packe...

Hi All, I'm wanting to know whether it's possible to use a 2960 or C1000 layer 2 switch to allow/route traffic between two subsets.PC1 192.168.45.1 255.255.255.0 to needs to talk to PC2 which is 192.168.46.1 255.255.255.0. Is this possible just using...

Hi All, What I'm asking might be a stupid question, but what I'm wanting to know is whether it's possible to communicate with the switch when the PC is connected to a SPAN interface? For context I have my switch (3750) configured for use with SNMP, m...