About ali.rodriguez

ali.rodriguez · 02-08-2022

HiI need to configure a Site-to-Site VPN from an ASA 5508.My question is, how do I configure the ASA so that this VPN is used as a second option to reach the remote destination? The first option will be a router that has MPLS configured to the same r...

ali.rodriguez · 02-01-2022

HiI will deploy a CSSP Proxy Virtual Machine to send events from my ASA firepower devices to cloud. For the configuration of send Syslog events to this Virtual Machine I get some questions: Also I want to know if is possible to configure 2 syslog ser...

ali.rodriguez · 10-05-2021

If I have 630 users, how much licences have I to buy or how it works?

ali.rodriguez · 10-01-2021

Hello Soon I will integrate a Cisco ASA 5508 with SFR 7.0 module to an FMC 7.0 These ASAs already have object configurations, ACLs among others. My doubt is that when I integrate them, this configuration will be automatically placed in the FMC? For e...

ali.rodriguez · 09-30-2021

Hello I see in the file that I haved download from Cisco that there are 2 OVF and I want to know which are the right or what is the difference? The disk file: Cisco_Firepower_Mgmt_Center_Virtual_VMware-7.0.0-94-disk1.vmdk And then we have to ovf: - C...

ali.rodriguez · 02-09-2022

Thanks, to route through vti, is it configured with the public IP or how? #MPLS - inside interfaceroute mpls 0.0.0.0 0.0.0.0 192.168.10.1 1 track 1#VPN tunnelroute outside 0.0.0.0 0.0.0.0 {Public IP ASA outside} 254

ali.rodriguez · 02-09-2022

My ASA have 2 interface: 1. internal interface that connects to the Router that has the MPLS connection2. interface outside with public IP that connects the VPN to the remote ASA.

ali.rodriguez · 02-09-2022

@MHM Cisco World wrote:ASA is the default router for all subnet, ASA connect to your edge router "which is connect to SP MPLS"Edge router receive the prefix from the Site-B and advertise it to ASA via routing protocol or you config static route in AS...

ali.rodriguez · 02-09-2022

Thanks for replyOnly that in my topology I do not have a core switch, several switches are connected to the ASA and the ASA to the Router that has MPLS.I already saw the solution of the static routes in the ASA but in the route that will send the tra...

ali.rodriguez · 02-08-2022

Okay Rob, thank you so much, I finally understand what you said and I like it. So for example the commands that I would use are something like this:#MPLS - inside interfaceroute mpls 0.0.0.0 0.0.0.0 192.168.10.1 1 track 1#VPN tunnelroute outside 0.0....

Member Since	‎08-19-2021 08:01 AM
Date Last Visited	‎08-02-2023 12:02 AM
Posts	44

User Statistics

User Activity

Configure VPN to being use for 2nd route to remote destination

How to configure 2 Syslog servers for Access control policy in FMC

I want to know the licences package for Secure endpoint

Integrating ASA SFR with FMC

vFMC installation File OVF which is the correct file?

Re: Configure VPN to being use for 2nd route to remote destination

Re: Configure VPN to being use for 2nd route to remote destination

Re: Configure VPN to being use for 2nd route to remote destination

Re: Configure VPN to being use for 2nd route to remote destination

Re: Configure VPN to being use for 2nd route to remote destination