Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello i got a problem with the connection of VPN with 2 ASA 5510.The log shows the following error: Local:xx.xx.xx.xx 500 Remote:xx.xx.xx.xx:500 Username:Unknown Negotiation aborted due to ERROR: Failed to receive the AUTH msg before the time...
Hi, i need to route to subnets form 2 diferents ASA interfases. The ASA also has an outside interfase works like gateway for internet access.Here is my configuraitionASA Version 8.2(1) !hostname ICE3names!interface Ethernet0/0 nameif outside security...
Hello im getting the following problem each time i restart the router %Mainboard-2-initfail: read failure - device @ 0xA8It does trows a lot of this erros and then restarts again making a clycle of the problem i have no clue what is going on.
Hello i know theres a lot topics about the subject but i been reading since past 2 weeks and i cant find my solution.My VPN Cisco client connects to the ASA 5510 and everything looks good but when i try send traffic(RDP) nevers connects and the logs ...
Hi thanks vishnshaI do see built of the connection in both ends but the receiving ASA starts log of "duplicated packet detected. Ignoring packet." and at the end it teardown the connection.
Result of the command: "show crypto isakmp sa"IKEv1 SAs: Active SA: 1 Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)Total IKE SA: 11 IKE Peer: Type : L2L Role : responder Rekey : no ...
Thanks here are statistics Result of the command: "show crypto isakmp"There are no IKEv1 SAsThere are no IKEv2 SAsGlobal IKEv1 Statistics Active Tunnels: 0 Previous Tunnels: 0 In Octets: 0 In Packets: ...
Thanks Julio here is the outputResult of the command: "packet-tracer input inside tcp 10.1.1.15 1025 192.168.1.20 80"Phase: 1Type: ACCESS-LISTSubtype: Result: ALLOWConfig:Implicit RuleAdditional Information:MAC Access listPhase: 2Type: FLOW-LOOKUPSub...
