About Fabrizio Pedracini

Fabrizio Pedracini · 09-26-2011

Hi Niclas,depends on the platform/IOS, but normally you should be able to get the mac address table using object dot1dTpFdbEntry, OID 1.3.6.1.2.1.17.4.3.1 from the BRIDGE-MIB group.from the MIB locator page:dot1dTpFdbEntry"Information about a specif...

Fabrizio Pedracini · 09-05-2011

Hi Richard,I mean that the connection will be using the class-default sfarm unless a match is found on the fisrt 4096 bytes of the header. Without "length exceed continue" the connection is dropped unless a match is found in the first 4096 bytes.hope...

Fabrizio Pedracini · 08-31-2011

Hi Bill,using WAAS express between 2 routers can be done without using a CM. Central Manager is recommended for monitoring and config, however it's not mandatory.hope this helps,Fabrizio

Fabrizio Pedracini · 08-31-2011

Hi,for question 1, the ACE still stops parsing after the first 4096 bytes. The difference when "length-exceed continue" is used" is that the connection is not dropped but rather load balanced to a less specific match, like class-default if configured...

Fabrizio Pedracini · 08-29-2011

Hi,you can upgrade 4.3.5 to 4.4.1 directly. I checked internally and this is a questions another customer had. 4.3.5 release date was close to 4.4.1 release date, so I believe this is why it's not present into 4.4.1 upgrade notes.cheers,Fabrizio

Member Since	‎10-21-2010 03:51 AM
Date Last Visited	‎01-14-2026 12:56 AM
Posts	64
Total Helpful Votes Received	142

User Statistics

User Activity

OID for Show Mac Address-Table

ACE parse length and lengh exceed query

WAAS Express between 2 routers, CM required?

ACE parse length and lengh exceed query

4.2.3b to 4.4.1 ?