Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Do you know if i can use Fast Ethernet card from 3640 into 2600 series router. My current IOS on 2600 router is 12.2.10. Do i need to upgrade to different version of IOS on 2600 for FAst Ethernet card.
I have two 3640 router running eigrp between them. I want to enable "log eigrp neighbor changes" on both router. What do i need to do to send eigrp loggging messages to my syslog server. This is what i did so far on both routerlogging 10.x.x.x (Sys...
I been receiving follwoing error on my 7500 router log:%vip4-50 RM5271-1-MSG Slot0 Procmem ECC single-bit exception data =8E040070..........etc.....Cisco recommending replacing with new VIP4-50. My question is do i need to do any configuration or ju...
I am getting memory allocation error trap from cisco works : here is the error messge:test%SYS-2-MALLOCFAIL: memory allocation of 381 bytes failed from 0x605155F4, pool processor. alignment 0.I tried to telned to router but it will not let me telnet....
I think your IOS is corrupted or set boot system is not configured correctly. Try to boot it from flash card. use "boot slot0 " at rommon prompt. If it boots correctly ,then copy image from slot0 to your bootflash
