About jasonnkh@live.com

jasonnkh@live.com · 09-22-2021

Hi All. Just wanna if this switch is able to perform Rj45 to fibre conversion? recently i plugged Rj45 cable(From internal Firewall) --> switchport gi1/0/24 via Cisco GLC-TE 10/100/1000BaseTX SFP, however it only show the port is up and running, anyw...

jasonnkh@live.com · 09-30-2021

Hi @Seb Rupik , Thank you so much for the great explanation and guide of how things work. Thanks and Regards,Jason N

jasonnkh@live.com · 09-30-2021

Hi @Kasun Bandara , Thank you so much for all the wonderful information and guide, however I do configured on the switch command below in order to make the conversion work. int gi1/0/24 mdix autoThanks and RegardsJason N

jasonnkh@live.com · 09-22-2021

Hi @Seb Rupik , Thanks for your detailed information, it is connected in trunk mode and the switch is already configured below; int gi1/0/24 switchport trunk allowed vlan add 10,20,30 switchport mode trunk no shutis able to ping to the firewall...

jasonnkh@live.com · 09-22-2021

Hi @Kasun Bandara , Thank you for the detailed information, cos one of the colleague mentioned that the switch have the function and ability to auto-convert itself from Rj45 to Fibre once it connected, just to clarify is it true base on your experien...

Member Since	‎09-22-2021 12:18 AM
Date Last Visited	‎10-07-2021 06:14 PM
Posts	5

User Statistics

User Activity

C9300-24S (24 Uplinks port with 8x10G Uplink Module)

Re: C9300-24S (24 Uplinks port with 8x10G Uplink Module)

Re: C9300-24S (24 Uplinks port with 8x10G Uplink Module)

Re: C9300-24S (24 Uplinks port with 8x10G Uplink Module)

Re: C9300-24S (24 Uplinks port with 8x10G Uplink Module)