About kfulton

kfulton · 01-28-2010

Greetings,I'm running a pair of 6509s with a single SUP2/PFC2/MSFC2 each, IOS (tm) c6sup2_rp Software (c6sup2_rp-JK2SV-M), Version 12.1(27b)E4, RELEASE SOFTWARE (fc3).I'm running BGP to two external ISPs and to each other, and OSPF for the loopback a...

kfulton · 01-28-2010

Hi Raj,I whipped up a quick and dirty diagram.I have no explanation for why adding and removing the default route works. IP route table corruption perhaps?Anyway, this problem will randomly appear on any of our directly connected interfaces on either...

kfulton · 01-28-2010

Hi Raj,Fa4/8 is connected to a customer's router device. I used 4/8 as an example, but this problem has happened to different interfaces, randomly. The ACL is there as a sanity check to make sure the customer is not sending traffic from a phony sourc...

kfulton · 01-28-2010

Hi Raj,Thanks for the reply.The two 6509s are connected via etherchannel trunk. One of the VLANs is configured for routing between them. OSPF is configured on this VLAN for the BGP loopback addresses only. They are iBGP peers (using the loopback addr...

Member Since	‎01-28-2010 07:59 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	4

User Statistics

User Activity

50% packetloss to connected routes

Re: 50% packetloss to connected routes

Re: 50% packetloss to connected routes

Re: 50% packetloss to connected routes