Hi, I have a hub and spoke network with 200 spokes with EIGRP and suddenly one of them can not reach networks behind the Hub. The hub router and the spoke never lost the neighbors or networks. The only way to restore the spoke is changing the net...
Hi, We installed an ATA 186 and it is working fine but sometimes the calls placed through the router remains up forever. This happens with any type of interfaces FXO, FXS, E&M. Can anyone help me.thanks
Hi, I am using a VPN3005 and the VPN client 3.5.2.B with Win2K with an ADSL connection and RASPPPoE client. When i connect to the VPN using the "start before logon" and try to connect to the WIN2K domain, i receive an answer from the WIN2K serv...
Hi, I am using clients win 98 and win 2000 with VPN client 3.5.1(B) and a VPN3005 concentrator. I can establish the VPN and authenticate the user to the Windows 2000 server (who is the DNS and WINS server), map drives and so on, but i can not...
Yes, but the pc client reaches the PDC and this answer that the user is not part of the PDC database .I mean that the PDC is responding something bad but it respons.Thanks for your replay.
My problem is with the authentication and MTU values. Using a dial-up connection I have no problem but with ADSL there is two problems. 1- What are the MTU values i should fix for proper utilization? What should be the MTU for PPPoE client and what v...
I have the same problem browsing the neighborhood and with the address registered in WINS and DNS. If you are using a different block of ip addresses for vpn clients than the block of the LAN remember you must do this block routable within your LAN a...