Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I hope someone can help me. I try to configure the AP AIR-AP1852E-E-K9 without a WLC.Mobility Express is installed on the device. The hole WLAN only consits of this AP.I configured the AP via the provisioning WLAN. After the configuration has b...
The problem is solved. You have to assign the AP (not the WLC) an IP address because there is no DHCP.In the console you can check if the ap has an ip address (show ip inter brief). "wired0" must have an ip. With the command "capwap ap ip <ip address...
I know the ip address, of course. I configured it (192.168.5.31) in the configuration wizard, but the address is not reachable. Event ping is not working. Laptop and AP are in the same VLAN. Ping from the switch to the AP is not working as well.
I can't login to the management because I don't see the SSID. So I can't connect to the WLAN.Here is the output:(Cisco Controller) >show wlan summaryNumber of WLANs.................................. 1WLAN ID WLAN Profile Name / SSID ...
