Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've inheirited a network of some 50 older cisco switches which are being upgraded to 9300/9200 units. VTP was never configured on this network. When I replaced the old core switch with a new 9300 stack vtp showed as being in server mode. I don't rem...
I have inheirited an installation consisting of an AIR-CT2054 with a number of AIR-CAP1602I-E-K9s.A number of users have been complaining that their upload/download speeds maxes out at around 54MB/s and this seems to be the case with all of the anten...
I think I'm going to just disable it. Everything works fine as it is. I can still disable it on the couple of new switches I've connected by going physically to the units, so no risk of losing connection.anyway, thanks for the recommendations.Ian
This particular network is manually configured. Each switch has the vlans locally created and I enable or disable vlans on each trunk which limits the use of most vlans to just the main core switch.It might be easier to just disable vtp on the access...
@Leo Laohoo wrote: Sez who? Is the WiFi being used at, say, 4am? On a Saturday? I upgrade WLC firmware outside business hours. I do not have to "be there". I can schedule the WLC to reboot at a future time/date. When I said I had been unable to...
thanks for all the info guys. Unfortunately I have been unable to do anything with this as the APs are being used in events rooms for presentations and it seems they never stop. They've been going on all day for the last few days. Looks like I'm goin...
What effect do the DCA channels have? For 802.11a/n/ac I have channels 36-64 enabled, but the check boxes for channels 100-124 are not marked.This would seem to be the correct setting as far as I can tell.
