Hi! How can I configure this network to have ping from CiscoLinuxBased-2/CiscoLinuxBased-3/CiscoLinuxBased-4 in Ubuntu?I configured ospf between routers and I also advertise 192.168.107.0/24 in ospf on CiscoLinuxBased-1.I attached 2 photos.This is th...
Hi!I have an issue, how can I apply template rr-policy to a neighbor session? I don't have any optionP0#show versionCisco IOS Software, IOSv Software (VIOS-ADVENTERPRISEK9-M), Version 15.6(2)T, RELEASE SOFTWARE (fc2)Technical Support: http://www.cisc...
Hi! Can you help me with troubleshoot, I don't know where I am wrong?I don't see on BUH2, route from BUH1 (81.1.210.0/24).I attached config from BUH1, BUH02, ClinicaA01, ClinicaB02, P0.
Hi!Please help me, where am I wrong?I don't receice on BUH03 routes from BUH02 and on BUH02 routes from BUH03.I attached a map photo. BUH03router ospf 2 vrf REGredistribute bgp 100 subnetsnetwork 172.16.51.0 0.0.0.255 area 0!router ospf 1network 10.0...
Hi! I have a problem with the below network, on PE1 (BUH04) I have received routes from the direct connected client (MED 01) and from the one remote one (the one connected with PE4 (BUH04)), and on PE4 I receive routes only from the MED 02.I attached...
Here:CiscoLinuxBased-1#show ip ospf neighborNeighbor ID Pri State Dead Time Address Interface10.0.0.14 1 FULL/BDR 00:00:36 10.0.0.14 GigabitEthernet0/110.0.0.5 1 FULL/BDR 00:00:38 10.0.0.2 GigabitEthernet0/2CiscoLinuxBased-2#show ip ospf neighborNeig...
I modified that network on CiscoLinuxBased-4I received the route 192.168.107.0 on all routers, I have from all routers in 192.168.107.139. 192.168.107.137 is on CiscoLinuxBased-1 (int g0/0), but 192.168.107.139 does not respond to ping.How can I con...
IO2 is BUH02, I forgot to change the hostnameThe router doesn't have this option for show ip ospf vrf REG database all:BUH03#show ip ospf ?<1-65535> Process ID numberborder-routers Border and Boundary Router Informationdatabase Database summaryevents...