Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Can any body assist me in how to log the dynamic translations happening in the PIX 510 to a syslog server.We have done the configuration of Dynamic NAT translation logging to a syslog server in a 7206 router.The command line says ip nat log translati...
Hi,We have cisco 7206VXR with 12.2(13B) IOS . We have connected a PRI line to one of the E1 ports and currently ISDN calls (data ) are working fine.We need to configure the router to accept analog calls on the same PRI line and distrbute the channels...
We have 2 servers configured for loadbalancing, this is working fine but the problem is the multicast generated by these servers 224.1.1.6 ( UDP 1161 ) is not being forwarded by CSS. Please let us know if we have missed out something in the configura...
Hi,Since we do not have an URL filtering device, we intend to do this on a cisco 1721 router.We need to allow only hotmail.com and yahoo.com and block other http traffic entering this router. Interface E0 is the input interface and F0 is the output i...
Hello,We do not have any URL filtering software like websense, but trying to achieve the same using NBAR in router.I need to allow only hotmail.com and yahoo.com and block all other URLsHere is the config I am trying to do..Router(config)#class-map m...
Thanks Tanveer,I have removed the other VLAN and multicast is working on the same VLAN.For Info : Is there any workaround for multicast routing between VLANs
I tried match protocol http host "*"but still there are no matches, but I have seen an observation when I give the command " sh policy-map int e0" command I could see some matches for a day around 100 or so.. but I think it is only syn packets and no...
