Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a Cisco ASR https://pastebin.com/fe0R4AeJ and a Cisco Nexus switch https://pastebin.com/jFs6jRqgI can console in the ASR and ping the public ISP and pubic gateway. I connect my computer to the Nexus switch and get a private IP. However, I am n...
I am trying to follow this guide and I am on step 2. Configuring Cisco Router for Internet Access-IP Route Cisco | Configuring Cisco (deltaconfig.com)I am consoled into my router.I have a Cisco ASR 1001 and I am setting up the TenGig TE1 as my WAN po...
Can you take another look and see if there's something I need to change to ssh into the Switch? I can ssh into it from the MGMT port but not from the network.
Thank you so much.How come the website used this permit instead of what you suggested? Configuring Cisco Router for Internet Access-IP Route Cisco | Configuring Cisco (deltaconfig.com)
Define a list of internal addresses for translation to the extern...
On the ASR, I have nat setup for inside GigabitEthernet0/0/2 and out TenGigabitEthernet0/1/0 NAT. I also have the access list setup on the ASR. Is there something wrong with it? The config is in the original PasteBin post.
The interface shows down. SFP module is 10G-SR plugged in. I also tried a 10G-LR-S module. The public IP given to me is manually configured. I will check with the cabling team to see if the patching is correct. Thanks for your help.
