About dennis.u

dennis.u · 11-10-2021

I bought a WS-C6509 chassis for a trainee and test lab, it was manufactured in 1999.I already purchased a FAN tray, two power units and 3 line cards (2x mini GBICs, 1x RJ54 ports). Now I bought a supervisor engine (WS-SUP720-3B). However, during the ...

dennis.u · 11-11-2021

@Scott Hodgdon Thanks for pointing this out. I was able to find a 6000 Series Guide in the archives of the internet. That seems to be the reason.But, I'm wondering that the tag on the device claims to be a C6509 while the chassis says "6000 Series" a...

dennis.u · 11-11-2021

It's true, there are 6509 and 6509-E. The FAN tray of the E-version is wider, the power connector is placed differently.But there are no differences in the Cisco official "Catalyst 6500 Series Switch Installation Guide" (as of Feb 03, 2012) regarding...

dennis.u · 11-10-2021

Hello @Scott Hodgdon, Here you go. I attached the total view as well as an inside view of slot 5 and 6. Thank you.

dennis.u · 11-10-2021

Hello @Georg Pauwen This is a picture from the chassis (I was aiming to slot 5, of course). On the left side of the massive connector, you can see two sticks. The upper one is solid, the lower is half-round. The angle of the half-round does not matc...

Member Since	‎11-10-2021 12:51 PM
Date Last Visited	‎12-01-2021 06:22 AM
Posts	5

User Statistics

User Activity

WS-SUP720-3B does not fit into WS-C6509

Re: WS-SUP720-3B does not fit into WS-C6509

Re: WS-SUP720-3B does not fit into WS-C6509

Re: WS-SUP720-3B does not fit into WS-C6509

Re: WS-SUP720-3B does not fit into WS-C6509