About b.smeets

b.smeets · 02-06-2003

I use RME 3.4 on Solaris 7. RME Configuration Archive cannot get the (running) config files from Cat 5000-devices (supervisors) into the archive.Using TFTP, it states 'Invalid TFTPBoot Directory' and nothing happens. I know this is a bug in Bug Track...

b.smeets · 09-06-2004

Probably your SNMP timeouts in Campus Manager are too low. If a device is busy, it might take a little too long to respond to the SNMP polling of the ANI server. Try raising these timeouts under ANI Server Settings, or better still, find out why the ...

b.smeets · 06-25-2004

If you run CW2000 under Unix, the files/opt/CSCOpx/campus/etc/users//*.xml correspond to the Top.Services maps. You might backup these files to another location from the Unix prompt, and place them back if needed.

b.smeets · 10-31-2003

As an alternative, you might consider using What's Up or What's Up Gold - it pings/polls devices and turns them green, yellow or red on a map, and it can poll at least every minute. We use it instead of Topology Services for detecting reachability pr...

b.smeets · 10-03-2003

Ah, but there is. Select Custom Reports under RME's Inventory and choose the Create button. You can then make your own report on serial numbers - just choose Serial Number as your Report Type.

Re: user tracking in cli mode · 08-25-2003

You do need an X-server on your workstation to run UT. Moreover, you need to set the Unix DISPLAY variable on the X-client (=CW2000 server) to point to your workstation:CW2000-server$ set DISPLAY=your_host_name:0

Member Since	‎01-10-2003 12:57 AM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	16
Total Helpful Votes Received	1

User Statistics

User Activity

Cannot retrieve config file from Catalyst 5000 series

Re: CM3.3 - Topology View

Re: CiscoWorks Layer2 Topology Map

Re: Campus manager Topology Services polling interval

Re: report on the serial numbers of the Cat switches

Re: user tracking in cli mode