About vijaykhapekar

vijaykhapekar · 10-24-2013

I configured port based VLAN with 3750 L3 switch and 2960 L2 switch. I configured windows DHCP server on which I defined 3 DHCP scopes for each 3 VLANs. Below is the configuration of L3 switch:interface GigabitEthernet1/0/24 switchport trunk encapsul...

vijaykhapekar · 10-09-2013

Hello,I have Cisco 3750 L3 switch and 2960 L2 switch and want to create MAC based VLAN with this. I wanted to know how do I proceed? What do I need to configure to support MAC based VLAN.

vijaykhapekar · 01-21-2013

Hello,I have hybrid network in which I want to configure VLAN on Cisco 2960 S switch. I have unmanged switch where my DHCP server and other servers are connected. Now I created two VLANs on cisco 2960S and they don't talk each other, but as soon as ...

vijaykhapekar · 05-29-2012

Hello,I have a hybrid kind of network. I want to create create two VLANs on Cisco SGE2010 so that these two VLANs should not talk each other but at the same time they are able to talk Domain controllers, DHCP and other servers which are on other swit...

vijaykhapekar · 10-28-2013

After adding static routes about all VLAN, my problem is resolved now. I didn't make separate VLAN for firewall since first solution resolved my problem. Thanks for all your help. I really appreciate that.

vijaykhapekar · 10-25-2013

After adding zero's route, my VLAN1 is through means getting internet. I also able to get IPs from DHCP to other VLANs.But internet is not getting on other VLANs except VLAN1.

vijaykhapekar · 10-09-2013

I don't want to use port based VLAN. Membership should be decided on MAC address of device. Suppose I have laptop user who keeps on moving on the floor, so wherever he sits he should get his VLAN.

vijaykhapekar · 01-22-2013

Hello, I created port based VLANs and assigned one port to each VLAN. I didn't use any IP address scheme in the current setup. Let me clear you about how network is designed. I given two uplinks from unmanaged switch to 2960 switch for each VLAN. ISP...

vijaykhapekar · 01-21-2013

I confgured two VLANs and assigned one port to each VLAN. These VLANs work(not communicating to each other) when there is no unmanaged switch in the picture. But as soon as when I connect unmanaged swich to Cisco 2960 S switch, both VLANs start comm...

Member Since	‎05-26-2012 04:40 AM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	13

User Statistics

User Activity

port based VLAN with Firewall and Microsoft DHCP server

MAC based VLAN

VLAN on 2960S switch

VLAN configuration on SGE2010

port based VLAN with Firewall and Microsoft DHCP server

port based VLAN with Firewall and Microsoft DHCP server

MAC based VLAN

VLAN on 2960S switch

Re: VLAN on 2960S switch