About sarangad

sarangad · 03-18-2007

Hi all, I recently configured a cisco ASA 5500 firewall with PAT & basic filters. Everything is ok other than DNS. I dont have any internal DNS servers I am using my ISPs DNS servers for name resolutions. In the nslookup utility of a client computer ...

sarangad · 03-16-2009

Go to the interface linecard 0then issue shutdown command

sarangad · 03-15-2009

It will not allow you to change the linecard setting while it is active. First shut down the line card then apply the command you want then no shut down it. If the system in production this might affect the traffic processing.

sarangad · 03-02-2009

You need to define following AV pair in the RADIUS profilecisco-avpair="ip:sub-policy-Out=CUST_BW_PKG_1_OUT" cisco-avpair = "ip:sub-policy-In=CUST_BW_pkg_1_IN"then RADIUS will pass those two policy map names as subscribers inbound& outbound policies...

sarangad · 03-02-2009

enable cef on the PPPoe aggrigation interface then you will see it is improved

sarangad · 03-02-2009

Yes there is a cisco BB aggrigation product call ISG. You can implement this on cisco 10K series routers or on new ASR series.

Member Since	‎03-18-2007 09:05 AM
Date Last Visited	‎08-27-2025 11:44 PM
Posts	6

User Statistics

User Activity

NAT Problems with Cisco ASA 5501

Re: SCE 2020:inline-cascade

Re: SCE 2020:inline-cascade

Re: Control bandwidth with Radius Attribute

Re: Correct Configuation for 7206VXR with PPPoE??

Re: BRAS problem