About deepak.singh.rawat

deepak.singh.rawat · 02-14-2022

Hi Experts,Can you help me how can i enable the RS-FEC on a 25Gig Port in isco Nexus9000 C93180YC-EX bootflash:///nxos.9.3.8.bin.It gives me a error like below.nx9000(config-if)# fec rs-fecERROR: FEC validation failed on eth1/18 due to incompatible c...

deepak.singh.rawat · 12-08-2021

Hi,Our Cisco switch -3548X on version 9.3.2 is having a dot1x port based feature is enabled and connected to a free radius server for authentication. We are trying to give the multiple Vlan in the Free radius server user file so that Cisco can allow ...

deepak.singh.rawat · 04-19-2022

Hi,The problem got solved now Solution: the issue in the lack of accounting stop messages, so we added accounting to the switch Regards,Deepak

deepak.singh.rawat · 02-15-2022

Thanks you Leonardo for your reply. Thank you experts

deepak.singh.rawat · 02-15-2022

Hi Christopher,Here is the output.nx9000# show interface Ethernet1/18 transceiver detailsEthernet1/18transceiver is presenttype is SFP-H25GB-LRname is ERICSSONpart number is SPBD-25GB4K1RE1revision is Aserial number is 1948142B1200070nominal bitrate ...

deepak.singh.rawat · 02-15-2022

Hi Reza,Current config on port is like below, i tried to do the full duplex and speed 25000 and then i try to put the fec to rs-fec but i got the same error.interface Ethernet1/18switchport mode trunkdot1x pae authenticatordot1x port-control autodot1...

deepak.singh.rawat · 02-15-2022

Hi Georg,The rs-fec option is coming on the port but when i try to enable it gives error. version 9.3(8) Bios:version 07.69interface Ethernet1/18switchport mode trunkdot1x pae authenticatordot1x port-control autodot1x re-authenticationdot1x host-mode...

Member Since	‎12-08-2021 03:29 AM
Date Last Visited	‎04-20-2022 12:20 AM
Posts	10
Total Helpful Votes Received	10

User Statistics

User Activity

How can we enable the RS-FEC on 25gig Port on Cisco C93180YC-EX

Problem in 3548-x switch with dot1x in multiple VLAN assignment

Re: Problem in 3548-x switch with dot1x in multiple VLAN assignment

Re: How can we enable the RS-FEC on 25gig Port on Cisco C93180YC-EX

Re: How can we enable the RS-FEC on 25gig Port on Cisco C93180YC-EX

Re: How can we enable the RS-FEC on 25gig Port on Cisco C93180YC-EX

Re: How can we enable the RS-FEC on 25gig Port on Cisco C93180YC-EX