About crewdog10

crewdog10 · 09-14-2011

Hello I'm new to the forum. Hope this works out. Basically I have a test lab consisting of two ASA's both running IOS 8.4. I would like to connect the outside interface of ASA2 to the DMZ on ASA1 and use the outside interface on ASA1 for ISP connecti...

crewdog10 · 10-03-2011

Why not try a port scanner like GRC Shields UP! Just Google it. It's an easy way to check for listening ports and ICMP replies. BTW, Mike, I'll have to try those commands also ;-)

crewdog10 · 09-16-2011

I got on the ISP by changing the DMZ security level to 50. Now all I have to work on is the static NAT which I can do a bit later. Thank you Sir's ;-)

crewdog10 · 09-16-2011

First off, thank you both Alain and John. I am now able to ping from my VM'S on ASA2 to the DMZ interface of ASA1. Great! My intention was to have the IP's statically mapped to make troubleshooting easier. Ideally I'd like to have:VM on ASA2 ...

crewdog10 · 09-16-2011

That didn't work. I don't think it's an issue with ping but with how I set up nat.

crewdog10 · 09-15-2011

Wow not a single reply for an easy question. Did I post this in the wrong area?

Member Since	‎09-14-2011 01:04 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	6
Total Helpful Votes Received	4

User Statistics

User Activity

Static NAT on an ASA 5505

ASA outside interface port scan

Static NAT on an ASA 5505

Static NAT on an ASA 5505

Static NAT on an ASA 5505

Static NAT on an ASA 5505