About Adam.Jaster

Adam.Jaster · 10-05-2011

I have a number of 1142N APs around the office that are running our internal wireless network. I want to use the second radion on the APs to provide a guest wireless network as well, but I want that netowrk to be on a separate VLAN so that the traff...

Adam.Jaster · 10-04-2011

I am trying to find a way to configure 4 AP's (LAP1142N model) to broadcast 2 WLANs, each with its own VLAN. There is already an existing one that is connected to the internal network, but we woud like to add a second segmented network that goes dir...

Adam.Jaster · 10-05-2011

I did a lot of digging and it looks like this is no possible to do how I want to do it because the AP's indeed do not support dot1q. It needs to be handled through the controller using AP groups and VLANs. Supposedly, all of the ports on the contr...

Adam.Jaster · 10-05-2011

Yes Jon, the data can go through the switches to the internet, but should not be able to talk to internal systems.I tried to set up a trunk port to the AP's and I was able to ping it directly, but it was not able to communicate with the Controller a...

Member Since	‎10-04-2011 01:10 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	5

User Statistics

User Activity

2 WLANs with 2 VLANs on one lightweight AP

Multiple VLAN's over one port

Multiple VLAN's over one port

Multiple VLAN's over one port