Hello, I'm using an ASR9K and i've configured a bridge domain attached to an EVI that is connected to another device.The configuration of the L2VPN Bridge Group is as follows. RP/0/RSP0/CPU0:cisco-asr9k(config)#do show run l2vpn bridge group Mark_Kaz...
Hey, I'm running Flexible Cross-connect service over EVPN and i'm trying to establish CFM CCM over it. I'm running it in a lab, and i'm getting "configuration errors present" in the "show ethernet cfm services" but i can't tell where is the error.My ...
Hey !I'm trying to establish an S-BFD session (seamless BFD) with an SR-TE policy that utilizes OSPF with a single path and 2 segment lists.I have an SR-TE policy configured with 2 segment lists as followssegment-routingtraffic-engpolicy SRTE_blasour...
Hello !I have a seamless bfd session running on a SR-TE policy what is configured and is UP. segment-routingtraffic-engpolicy SRTE_blasource-address ipv4 66.110.0.63color 1 end-point ipv4 33.33.33.33bfdminimum-interval 100multiplier 5invalidation-act...
Hey Here !,I have the following topology consisting of 3 routers.66.110.0.63 -> 22.22.21.22 -> 33.33.33.33 Area - 0 Area - 0 Area - 0 I want to create a SR-TE tunnel in order to establish s-BFD. Now my issue is t...
Thank you for the reply and for your insight however i just noticed that i made a typo. I meant s-BFD (seamless BFD).It is monitoring the liveliness of an SRTE head and tail. But i assume that there is a way to monitor more than 1 segment list such a...
Hey Harold, Apologies for the late reply but better late than never segment-routingtraffic-engpolicy SRTE_blasource-address ipv4 66.110.0.63color 50 end-point ipv4 33.33.33.33autorouteforce-sr-include!bfdminimum-interval 50multiplier 2invalidation-ac...
Hey Harold, Thank you for the reply your explanation helped me understand what's going on. I'm using the following version as shown via the show version detailCisco IOS XR Software, Version 7.5.1Copyright (c) 2013-2021 by Cisco Systems, Inc.Build Inf...
Thanks Harold that resolved my issue. I've managed to configure the Policy and it went UP and with it sbfd packets began to flow. Thank you for the super fast reply. Pleasure !
Yes certainly all 3 routers are under the same area as shown in the OSPF database OSPF Router with ID (66.110.0.63) (Process ID Mark)Router Link States (Area 0)Link ID ADV Router Age Seq# Checksum Link count22.22.21.22 22.22.21.22 1688 0x80000013 0x0...
