Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm trying to setup an 1841 with an ADSL 1 WIC and PPPOE but having difficulty.IOS version is : Cisco IOS Software, 1841 Software (C1841-ADVENTERPRISEK9-M), Version 15.1(4)M6, RELEASE SOFTWARE (fc2)I follow the Cisco procedure, but get stuck at the p...
I have two sites, one has an RV042 and the other an RV042G, and there is an IPSec tunnel between the two.Windows file sharing works between these two over the tunnel.I have a laptop with QuickVPN Client which I use to connect to either site.If I conn...
I'm trying to establish a site to site VPN using ipsec between an RV220W in the UK and an RV042 in Italy to no avail.The RV042 tells me it's "waiting for a connection" and it gives 0.0.0.0 as the remote address (i'm using Dynamic addressing at both e...
I have just purchased three ubuntu based devices (o2 Joggler) which will not connect to the Internet through my RV220W.I've tried using wired and wireless mode; they connect to my network and can see dand interact with internal devices, but cannot co...
Hi everyone, first post here.I have just installed an RV220W in place of a DG834gt and have tried to setup port forwarding to no avail.Having read this post https://supportforums.cisco.com/thread/2104376 I tried setting it up first via Port Forwardi...
Thankls for that, Now I get this:Rosina(config-if)#ip mtu 1492Rosina(config-if)#ip nat oRosina(config-if)#ip nat outsideRosina(config-if)#dialer pool 1Rosina(config-if)#ppp authentication pap chap callinRosina(config-if)#ppp chap host nanme aliceadsl...
Hi Leo, thanks, but I think you'll find that's a red herring, the line isn't actually plugged in at the mo.My problem is it won't accept the commnads to set it up. Specifically, the PPPOE command. I only get options for L2F and L2P, using Cisco recom...
Hi Jonathan,Thanks for your help.Of course I realised that Quick VPN won't work with the laptop firewall turned off. I had a look at the link you posted. and checked that all my settings are the same. Interestingly, the RV042G has Block Wan Request e...
Thanks,I won't be able to try it until Friday, but I did try and turn off the Win7 firewall completely i.e. both local and public subnets on two separate PCs. I also added in the exceptions for the VPN subnet, this did the trick on the RV042G system....