you also can configure a policy map on the ingress interface, in which you'll set the match statement for each subnet.then with a show policy, you'll get a packet counter for each subnet.it's not perfect, but it cost nothing. otherwise, you can use n...
It will affect all the traffic, but it'll use the service policy output to shape. So if you have defined the traffic class CLASS-HIGH, the priority reserved for that is still there.Ex: you have a 2M link, you want to shape to 2M, but with 150k for AF...
Sorry for the late answer this time (in production, you can have time to post and 5 min after, there is a rush)."However, the same policy is accepted on an ATM VC since the VC supports native ATM-layer shaping via the vbr-nrt, vbr-rt, cbr or abrcomma...
