Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,We have recently filled an ISE Mac Address Group for MAB authentication. But just we did that the device get authenticated by ISE.And sometimes after the device failed the authentication. Checks from ISE Group indicates that the MAC address wa...
Hello dear,Recently, while debugging an wireshark packet capture from a C9300 used as MPLS PHP, we noticed a double mpls label (transport and service label) in the frame even though in the mpls frowarding table the transport label is empty with instr...
Hello dear Genius community members,C9300 can function like a L3 device (as flat ip router or mpls PE). Per the datasheet it can handle at least 32.000 routes (24.000 direct routes + 8.000 indirect routes). Unfortunately when reaching around 7.000 ro...
It seems that the issue is flagged as a bug CSCwk94725 : Bug Search Tool (cisco.com). Problem solved in ISE 3.2.0.542-Patch7. We are planning to move to that patch and will check.
Finally we did a debug session in real non-prod environment with true cat9k and went to the same result. But while looking in diverse CLI "platform software fed switch active" and "platform hardware fed switch active fwd-asic" we saw that the packet...
Hi MHM,Thanks for taking your time to debug my concern. So we agree with @filopeter saying that this happen before real data forwarding. One more question: are all your MPLS Routers like C9300 ? because in my real world, i did the same packet capture...
