Dear community,
Joe Clarke has recently helped me figuring out how to create an applet to run an ssh command to perform remote execution from one network component onto another, namely: ssh -l username ipaddress "show interface status"
The applet...
Dear community,
I have yet another challenge and as much as I admire the possibilities with EEM and TCL. I am learning everyday and this technology is fairly new to me.
Goal:
I would like to have a policy or applet running on the router, as the s...
Dear community,
Background information and Issue:
IOS menu is used after an initial SSH session to the router. Switch interface status ouput is one of the options in the menu. Currently rsh is used to output this but telnet is required in the vty...
Hi, I recently installed 2 wlc 5508 with the latest software 7.3.101.0. There is an issue I can not resolve. I am not able to activate the Internal DHPC Server. The following message appears: "Error in setting dhcp scop leasetime"....
Thanks Joe. Where would I be without you! I completely removed whatever event manager configuration i had and reregistered everything. It is working perfectly.
I have successfully created a few scripts now and also an applet (event triggered) to do...
I have managed to register the policy. This is my new error. The script doesn't output the interface status and simply times out. (even if i change maxrun to 1200).
#Process Forced Exit- MAXRUN timer expired. while executing"error $_cli_result $...
Thanks Joe.
I have tried to convert this eem applet to a tcl script using https://www.marcuscom.com/convert_applet/
However, i cannot get this script to run..
It gives me an error on the first line:
invalid command name "::cisco::eem::event_reg...
To workaround the annoyance of the radio interfaces not enabling after changing to a custom AP group and rebooting, try setting the RF profile setting to 'none' in the Out-of-Box AP group settings:
Test:
- AP 'Clear config' via WLC
- AP comes up...