I am trying to build a simple EEM (my first time on this). The ideia is simple, to check if my ISP link is offline based on 2 IP SLA tests and if both are down, run EEM.
ip sla 1 icmp-echo 22.214.171.124 frequency 10 ip sla schedule 1 life forever start-time now
ip sla 2 icmp-echo 126.96.36.199 frequency 10 ip sla schedule 2 life forever start-time now
event manager applet ISP_OFFLINE_REMOVE_ROUTE event track 1 state down event track 2 state down action 1.0 syslog msg "ISP IS OFFLINE - IP SAL 1 TESTING IS DOWN" action 2.0 cli command "enable" action 3.0 cli command "conf term" action 4.0 syslog msg "REMOVING DEFAULT ISP ROUTE" action 5.0 cli command "no ip route 0.0.0.0 0.0.0.0 172.24.114.254" action 6.0 syslog msg "INTERNET RUNNING OVER MPLS LINK"
... View more
Good morning. I'm having trouble configuring a QoS for my network. As i have never configured QoS on ASA equipment, i dont know if my configuration os correct. The fact is i have a video conference equipment on my internal network, with the ip address of 192.168.1.100. All my connectios comming from 201.x.x.3 are sent for my camera inside my network. Almost like a DMZ configuration. This is the QoS configuration, but i dont know if its correct. Can someone read and tell me ? acess-list ip-qos extended permit ip 192.168.1.100 255.255.255.255 any acess-list ip-qos extended permit ip any 192.168.1.100 255.255.255.255 class-map qos description qos policy match access-list ip-qos policy-map qos class qos police output 1045800 1048576 police input 256000 256000 service-policy qos interface inside Thanks !
... View more