I'm in Australia, using AAPT as my PSTN provider, SPA400 firmware 126.96.36.199 I've tried each of the options in the 'Caller ID/CP Tone Method' drop down list, and the parameters in my 'Voice' page are according to the 'Australian' row in the "SPA400 Localization Configuration" document. My SPA942s are all showing 'Anonymous Caller'. Here are my 'Line' settings': Transmit Gain: 3 dB (-13 ~ 13) Receive Gain: 3 dB (-13 ~ 13) Impedance: 220 Ohms + (820 Ohms || 120nF) Tip/Ring Voltage: 3.2Volts Operational Loop Current Min: 12mA On-Hook Speed: 26ms (Australia) Ring Frequency Min: 10 Hz Ring Frequency Max: 100 Hz Ring Validation Time: 256ms (default) Ring Indication Delay: 512ms (default) Ring Timeout: 640ms (default) Ring Threshold: 13.5-16.5vrms (default) Ringer Impedance: High (default) DC Current Limiting: Disable Caller ID/CP Tone Method Australian Is there any other settings I need to consider to get this working? I can't see anything on my SPA9000 that I need to change. I have not tried the beta firmware above - the other two commends are not encouraging, has anyone had luck with that?
... View more