Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Keldridge,
Indeed, the AnyConnect client by default blocks the connection to un-trusted servers (there is a box you can "uncheck" on the settings so it will not be blocked but instead it will warn you that the server is not trusted and that is...
Hello,
If I recall correctly Windows XP las day of support was on August 2014.
According to Cisco documentation the supported versions for OS on AnyConnect 3.1 are from Windows 7 and above. Below the document for reference.
http://www.cisco.com/c/...
Hello Jfeo,
I was looking for the reverse document from the one you shared and found this:
http://www.cisco.com/c/en/us/support/docs/security-vpn/ipsec-negotiation-ike-protocols/46242-lan-to-lan-vpn-client.html
However this example uses an PIX f...
Hello JM90,
Below a link with vpn filters applicable to the group policy linked to the tunnel groups:
http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/99103-pix-asa-vpn-filter.html
Regards,
Miguel
Hello Evan,
Just to clarify, the first and second line on the nat configuration you shared are defining the traffic the same way.
This line is bi-directional:
nat (Perham-LAN,Outside) source static any any destination static SSL_VPN_POOL SSL_VPN_POO...
