Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am managing a Nexus 3548 switch, with a port-channel as its uplink (routed) and some local networks (access).It is updated to the latest stable version. Recently, after some hours (ranging from 1 hour to a couple of hours), the switch becomes very ...
I am trying to get statistics for subinterfaces on a Cisco Nexus3500 C3548P-10GX switch.The subinterface is configured for a port channel as shown below.interface port-channel3.1802
encapsulation dot1q 1802
ip address 192.168.1.165/30
There is n...
Actually, multiple interfaces flapping in random.one is eth1/1 one of the uplink members XXXXX(config)# sh int eth1/1Ethernet1/1 is upadmin state is up, Dedicated InterfaceBelongs to Po3Hardware: 100/1000/10000/40000 Ethernet, address: xxxxx (bia xxx...
I have recently upgraded it to NXOS 9.3(8) but still no luck.Software
BIOS: version 5.4.1
NXOS: version 9.3(8)
BIOS compile time: 03/30/2020
NXOS image file is: bootflash:///nxos.9.3.8.bin
NXOS compile time: 8/4/2021 13:00:00 [08/04/2021 2...
