Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have an odd problem and I am looking to see if anyone else has seen this.We have two 3560G-48PS switches running 12.2(35)SE, each has 12 or so 1142 APs connected. These are connected to a 1500kVa UPS which is in turn connected to emergency power t...
We have an FWSM in routed multiple context mode with two VFW's. One will be protecting dept. LANs and the other will handle servers. We would like both VFW's to handle firewalling mutliple VLANs, some will require NAT, non-routable xlated to routable...
About 8 months ago I upgraded a bunch of our 2950's to 12.1(22)EA4 and ran into performance problems. I was losing telnet/ping connectivity to the switches and users who were connected to them reported performance problems. I opened a TAC call and wa...
I figured that I would put an update out here.We upgraded the 3560's to 12.2(53)SE2, and at that point we began to get some more output. The error logs actually began showing output regarding low DC input to the POE controller, and it indicated that ...
Jon,The current firewalls that I am replacing use NAT with proxy arp to handle their outside addressing, as opposed to a static route in the MSFC directing the outside subnet to the outside interface.I would like to be able to use one context to repl...
No error logs, no errors on the ports at all . . . .When the problem occurs I see very little traffic at all, as for what type it is, I do not know. I can do some packet captures. My guess off the top of my head would be a mix of TCP/IP and Appletalk...
