About vansmaq77

vansmaq77 · 06-22-2010

I have a new metro ethernet connection installed between HQ and a remote site and while the metro ethernet connection is working properly and I can route between the two Cisco 891 routers at each location, I cannot route to the remote LAN from either...

vansmaq77 · 06-22-2010

you are totally right! cannot believe I missed that.Thanks a million!Maynard

vansmaq77 · 06-22-2010

j.blakley:I can ping the WAN interface on the remote 891 from the HQ site as shown in the following:HQ-ROUTER#ping 192.168.220.2 source 192.168.220.1Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 192.168.220.2, timeout is 2 seconds:...

vansmaq77 · 06-22-2010

djh278778:I tried changing the route for the 192.168.200.0/24 subnet to 192.168.220.1 with no luck.To answer your other questions: 192.168.209.1 is the default gateway (L3 switch) at the secondary site and does not have any routes pointing to the 891...

vansmaq77 · 06-22-2010

j. blakley:here are the route tables:HQ SIte:NMCC-LG-1#sh ip routeCodes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA...

Member Since	‎06-22-2010 12:00 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	5

User Statistics

User Activity

cannot route to remote LAN over metro ethernet

Re: cannot route to remote LAN over metro ethernet

Re: cannot route to remote LAN over metro ethernet

Re: cannot route to remote LAN over metro ethernet

Re: cannot route to remote LAN over metro ethernet