About lalitbogra

lalitbogra · 03-06-2016

I have Cisco 2911 router and want to do some basic configuration. 1. Setup GE 0/0 for WAN 2. Setup GE 0/1 for LAN 3. Routing to allow LAN for Internet Access 4. DHCP DNS 5. Enable HTTP access Lan port will be connected further with Sonic Wall and th...

lalitbogra · 04-12-2016

Dear Peter, from your above details point 2 commands are to set IP of AP and default router which you can use IP of your computer. (I would suggest to do it in separate computer not linked with your network) This is temporary settings just to conver...

lalitbogra · 04-05-2016

Hi Peter, First of all open your tftpd32 and check if ip binding is proper then try with this tftp://192.168.130.222/c350-k9w7-tar.122-13.JA1.tar flash: There is no need to change extension Let me know how it goes

lalitbogra · 03-07-2016

I have done further setting and posted new configuration. I am able to ping 4.2.2.2 but its not going further for internet access. any suggestion?

lalitbogra · 02-26-2016

Dear both many thanks for your support, yes finding directory was the issue and fixed it. The above process worked well and was very useful. Appreciate support.

lalitbogra · 02-10-2016

HI, I have followed the steps but have issue on loading with lightweight flash. can you advise, I have attached putty process which will give you clear indication.

Member Since	‎01-26-2016 03:34 AM
Date Last Visited	‎08-16-2024 01:29 AM
Posts	6

User Statistics

User Activity

Cisco Router 2911 Basic Configuration for Internet Services

Dear Peter,

Hi Peter,

I have done further setting

Dear both many thanks for

HI,