About wehner

wehner · 08-07-2012

I'am testing a sg300 switch in layer 3 mode and created different vlansvlan1: 172.16.0.0/16vlan4: 192.168.4.0/24I inserted a default route to our internet router (172.16.0.55) and there a route back to the switch 172.16.2.101I defined no acls at the ...

wehner · 07-30-2012

Hello,I have a SG300 Switche working in layer 3 mode.I configured 3 VLANs on the switch with different ip'sVlan 1: 192.168.1.1Vlan 2: 192.168,2.1Vlan 3: 192.168.3.1Now I want to implement ACL to permit vlan2 to have full access on vlan3 but I want to...

wehner · 07-29-2012

Hello,I have a SG300 Switche working in layer 3 mode.I configured 3 VLANs on the switch with different ip'sVlan 1: 192.168.1.1Vlan 2: 192.168,2.1Vlan 3: 192.168.3.1Now I want to implement ACL to permit vlan2 to have full access on vlan3 but I want t...

wehner · 08-10-2012

Hi Tom,thanks for your patient.You pretty much pictured my configuration.The small difference is on gi1 where I'am connected to an umanaged switch with the router and the server (DNS,DHCP etc.)I have one static route from the router to 172.16.2.101 f...

wehner · 08-08-2012

Hi Tom,thanks for your answer.I did the most steps you mentioned except- Set a global default gateway (config t, ip default-gateway 172.16.0.55)I used a default route like you described too. - Assign an uplink for Vlan 1untagged, vlan 4 taggedVLAN4 s...

wehner · 08-03-2012

Thanks Thomas for you answer. That is pretty much how I created the access list. My problem if I understand it correct is if I deny access from vlan3 in the vlan2 acls then I will have no access from vlan2 to vlan3 because the reply packages coming ...

Member Since	‎07-29-2012 12:57 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	6

User Statistics

User Activity

sg300 and routing

sg-300 acl vlan question

sg-300 acl vlan question

Re: sg300 and routing

sg300 and routing

sg-300 acl vlan question