Hi Ronald,
The AP is loaded with mobility express image not the capwap image, please do change the AP type to capwap.
Connect to the Console Port, Telnet or SSH to the AP.
Login to the Mobility Express controller console.
In the Mobility...
Hi JGatti,
Please do refer the link below to customize or create the Threshold Values on prime.
https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-1/user/guide/pi_ug/mon-pol-thresh.html
Regards
Salma
Hi, If it's dead on arrival, better replace the AP from your partner or with Cisco if it's covered under warranty or contract. if this was working fine and if it has gone down now, then it's better to check for your warranty and get it replaced from ...
Hi,
Yes, as Steve mentioned there is no default username and password for initial configuration.
however, as you have already tried with the default username and passwords which most of the Cisco product have Like admin and admin or admin and Cisco...
Hi Karel, I really appreciate your patience in posting the query. Yes, there is a command to delete the configuration using "no" followed by the configuration line.However, most of the commands with 'no' will not be completed automatically and you ma...
