Hi,I got a Cisco6513 with native mode IOS. However, the keepalive command cannot be set on VLAN or switchport interface (Ethernet). Is there any workaround to make the local interface down if the interface on remote site is down?Thanks,Walter
Hi,We encounter a high CPU utilization problem when users run the multi-thread download program. It seems that the program will generate thousands of connections to the server with different client ports. However, some servers cannot accept too many ...
The MSFC2 sometimes sends small packets with the destination port 0xB00 to many destinations. The following is the netflow data:DstIP Protocol SrcPort DstPort ToDPkts FmDPkts ToDOctets FmDOctets MID12.215.91.115 1 0 2816 3 0 168 0 112.221....
We have three Ethernet WAN links connecting the remote site to central office.The routing information between two sites is exchanged by using iBGP. Instead of IGP, static routes are set on these two routers with per-destination load sharing enabled.I...
Hi,Yes, I want the VLAN interface to chanage state to "down" and I found that if the physical interface is down, the state of VLAN interface will also be down.The WAN link is a Ethernet connection and there are some devices in between our sites. We c...