About aboross12

aboross12 · 06-15-2010

We replaced our 4305 with a 4400g, using the latest software version #5.2According to the DMP's manual you can access the MIB on the DMP by http://<ip.address>:7777/get_param?p=xxxxxxThe 4400 does not return anything.Is any idea out there, what is th...

aboross12 · 05-06-2010

We are running #5.2 both on the DMM and DMP. The DMM > Digital Media Player > DMP Manager > Status = X . The DMM does not see the DMP. Clicking on the DMP discovery and the status did not change.The DMP is set to accept the central maanagement, the ...

aboross12 · 06-25-2010

Richard,Thanks for the follow up. The problem was resolved by using https vs. http. Since the 4300 accepted http, I tried the same method as I used earlier.Andras

aboross12 · 06-15-2010

I get the same answer > times out.Have you tried it?(I do not know if the https port is open or not via my firewall), Could it be an issue?

aboross12 · 06-15-2010

I tried and it failed. It timed out w/o ever asking for id/pw.Is there any way to provide the id/pw together with the GET?Andras

aboross12 · 05-10-2010

Problem resolved.The solution or rather what caused this problem. One of the setting in the DMM had a wrong ID/Password for the DMP.DMM:DMP/Settings/Server Settings/Servlet address - DMP User name/Password did not match the User Name/Password of the ...

aboross12 · 05-07-2010

Tom,I checked the "wire" and the DMM and DMP does talk to each other. The DMP responds to the DMM discovery request.Not sure if the capture helps you, but I attached both a .txt and a wireshark capture of the traffic between the DMM and DMPAndrasPs: ...

Member Since	‎05-06-2010 03:00 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	14

User Statistics

User Activity

How to access the MIB on DMP 4400g w. #5.2

DMM does not discover DMP

Re: How to access the MIB on DMP 4400g w. #5.2

Re: How to access the MIB on DMP 4400g w. #5.2

Re: How to access the MIB on DMP 4400g w. #5.2

Re: DMM does not discover DMP

Re: DMM does not discover DMP