Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have this weird problem where a specific switch port which happens to be part of a 2 switch 3750 Switch Stack is seeing multiple CDP packets from 3 extra switch port interfaces that are not directly connected. Noteworthy is that the far end devices...
in NAC L2 OOB per my understanding, a node coming online gets put in the untrusted network for the authentication/validation before going "out of band" or out to the regular subnet. As far as Quarantine Role for remediation, does there need to yet be...
I am not reading much of info in the way of guidelines to follow during design phases. What would be a reasonable size/number of subnets for behind each CAS, CAM, ACS etc capabilities by model, theoretical limits etc. If someone can give some hypot...
Please clarify for me the exact meaning of In-band and Out-Of-Band as it applies to CAS/CAM to get a user authenticated/validated; specifically mentioning the relevance of "trusted network", "untrusted network", "'virtual gateway" etc. so I can get a...
In simple terms a Multilayer Switch is a switch that operates at multiple layers of the OSI Model, normally more than the traditional Layer 2 Data Link Layer that switches traditionally use/used. A Layer 3 Switch is one which operates at Layer 3 Netw...
Also I just set aside Subnet Information for the Untrusted Managed Subnets. I have opted for 2 /22 subnets per Distribution Block, and 4 for the one distribution block that is substantially larger than the rest.Is that number reasonable, from all the...
Thanks for the explanation Faisal. I'm getting more the drift of it now. When I read down further the guide it started to shed me some extra light. In-Band-within the networks NAC primarily funcions(Trusted/Untrusted Network), and out-of-band when NA...
