Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Any news on this issue? I have the same problem with 9.1(1). When cable modem flaps the ASA keaps the old address. If I unplug the Cable Modem from the ASA and reconnect it does not renew the DHCP lease but keaps the old address.
For autonomous IOS the latest version is: 12.4(23c)JA5ap3g1-k9w8-tar.124-23c.JA5.tarFor lightweight the latest version is: 12.4(25d)JA1ap3g1-k9w7-tar.124-25d.JA1.tar
The input voltage range for AIR-PWRINJ-BLR2T is +12VDC to +40VDC. +24VDC must be provided to the power injector via the power jack. It’s located between the F-connectors to the left side and the Ethernet LAN port on the right side.What did you mean a...
Remember that the optimal distances between the antennas are calculated and used in order to get correct phasing on the RF signals. The cable lengths must be a part of this equation in order to achieve optimal distance. So don’t cut the original cabl...
You can share an external DHCP server and the same pool for several wireless controllers. You can use the same VLAN and the same SSID on all controllers. In fact you should use the same SSID and VLAN if you want to use the same DHCP pool on the exter...
