Hi,I don't see drops on the priority queue, so it seems like there's enough bandwidth for the voice traffic. At least in the outbound direction.is it possible for you to post the whole config and a 'show ip route' and 'show interface' of your outboun...
It looks like there are two things going on here:1. 10.10.10.2/32 shows up with an FD inaccessible on your L3 switch2. 10.10.10.2/32 is not received on your wan routerThese could have different root causes.I have recreated the topology you presented ...
In this scenario, there are multiple points of unrestricted redistribution (R1 and R4) between the RIP and OSPF domain, which is a recipe for routing loops.Here, R1 and R4 will learn routes from the RIP domain, redistribute them into OSPF and so the ...