Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
How often does a FWSM 2.5 and 3.1 replicate? Do they only do it when something changes, or do they replicate on a regular timed basis? we saw this in our Syslog and a few minutes later the FWSM stopped responding. We are troubleshooting and not su...
We are having a problem after configuring an ASA WebVPN to do Clientless. When a non Windows Vista system connects the clientless SSL Web VPN works just fine via the HTTPS:// address. If a Windows Vista system connects, it won't do it via the Clien...
We are setting up a Lan 2 Lan VPN using MPLS. The eqipment is a IOS 12.2 router to PIX 7.0. The tunnel is up and everyone can access the systems on each others LANS. The Internet connection is connected to the PIX. The users on the Router end cann...
We have a remote site that is changing their subnet. They have an access list doing a NONAT across the VPN tunnel. Will anything break if we just leave all the crypto maps, and the access lists the same, simply change the IP addresses that are defin...
Found the issue. According to TAC this is fixed in Anyconnect 2.1. This was just released on Nov 7th, and tested, and the errors went away. It is all working now.
The only other question related to this, is doing this on a router to router VPN, apparently the new subnet has not been added to the interface of the router. Is there a problem adding a second IP address to the VLAN interface on the router? The ex...
So I should just be able to copy and paste all of the old lines, change the IP addresses so it maches and apply only the new lines into the config?When you add new Crypto Maps and access lists for the VPN's doesn't it break the existing ones for a fe...
