Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have spanning-tree porfast enabled across all (non-trunk ports) in our enterprise. In fact, using the auxiliar vlan on ports ( switchport voice vlan X) enables spanning-tree on the port. I have also enabled globally spaning-tree portfast bpdu guar...
I have succesfully configure the CSS to load balance ldap request to 3 Windows AD servers. However, when adding SSL to the front end only it fails.I'm assuming it has to do with the certificate requiring extended key usages. Has anyone done this befo...
Is it possible to set a VMPS server on a 3560??If not what model do I need to set a VMPS server.I'm looking into deploy dynamic Vlans.Thank so much for any help provided
For the record:I intentionally created a loop using a dumb switch and also a direct connection from fast 0/z to fast 0/x and bpduguard seem to have mitigated the issue right away. One of the ports gets err-disabled right away. I tried several times, ...
Thanks for replying Edison,Yes, dumb switches don't send BPDU's but since the port its connected back to a second port on the managable switch wouldn't that send BPDUs'? port1:switcha<-----(dumb-switch)------>port2:switcha where switch a is a 3750 ...
Hi Robbie, Sorry for the delayed response. Here is the relevant config info. No backend SSL service yet, backend is still unencrypted, but at this point everything is on our data center not crossing any WAN or networks. One thing to note is that my ...
Finally got it working. The config on the CSS is pretty straight forward. The problem was with certificates. I was generating my own certificates using openssl and therefore were not trusted on the client pc I was testing with. All I did to get it ...
For me, it is the MAC OS X anyconnect client that does not work. It connects for about a minute and then it disconnects and it says re-connecting but never comes back.The windows version just works.Anyone any ideas?Thanks,Eric
