About jopificius

jopificius · 04-16-2010

I have a new RVS4000 I've updated with firmware 1.3.1.0 (I believe that's the latest, I cannot find anything later). It has a Cisco 678 in bridging mode on the WAN side and a Trendnet 8 port Gigabit switch on the other in modet doestic LAN. I map SS...

jopificius · 07-11-2010

Thanks for the response, NetSniffer RouterDog, but that's not the problem. The device doesn't reboot itself, it stops passing traffic. It requires a manual reboot to get it working again. With IPS enabled it lasts only a few minutes; without it, a wh...

jopificius · 05-09-2010

I talked for quite a while to a fellow on the number above, and we set up a list of things to try. As of this moment I have reset factory defaults and re-entered my particular configuration details, and I have disabled IPS. The machine has been runn...

jopificius · 05-06-2010

I'm getting this problem on an RVS4000 I bought earler this year. Has there been any resolution ?

jopificius · 04-17-2010

Thank you for your post. It is clear, then, that there is a real problem with this device (not that I was in any doubt before you posted).I expected more of Cisco, and this is not acceptable to me. They can't possibly have tested the product/software...

Member Since	‎04-16-2010 06:54 PM
Date Last Visited	‎08-18-2017 03:54 AM
Posts	5

User Statistics

User Activity

RVS4000 keeps failing to pass traffic

Re: RVS4000 keeps requiring a reboot

Re: RVS4000 keeps requiring a reboot

Re: RVS4000 keeps requiring a reboot

Re: RVS4000 keeps failing to pass traffic