Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is there a way to make the NAC guest server accept CSV files formatted with a semi colon( ; ) instead of the standard comma.The problem is that the default country settings for our machines forces microsoft excel to use semicolons in csv files instea...
I am building a test setup with open authentication and i am trying to get the theory right.First the scenario for which we are going to use dot1x with open authentication:We want to deploy dot1x throughout our network, which includes a number of use...
is it possible to do L3 NAC OOB with VGW.The documentation does not say that it is not possible, but i see some technical difficulties.In VGW deployment, the Auth IP = Access IP and only the vlan id changes. But on the other end of an L3 link I canno...
Found a problem in my setup, Downloadable ACL's are only supported by Cisco ACS.But as of IOS 12.2(52)SG filter-id and per-user acl's are available, which basicly do the exact same thing but support 3rd party aaa servers like MS-IAS
i found a possible solution:http://www.liutilities.com/products/registrybooster/tweaklibrary/tweaks/10146/But then again, what is the advantage for the user to disable the agent. If they disable it, they won't be able to access the network.So it woul...
that's a known problem described in CSCsh77730 of the open caveats in the release notes.the release notes describe the following workaround:"Workaround: Either uncheck the box or set that timer to a non-zero value. If it is set to anything else, and ...
yes, but there is a catch.The VLAN id used for the mapping rules is the Authentication VLAN id, which in turn is defined in the port profiles.So you will have to make at least 2 port profiles(1x Students, 1x Staff) and assign the profiles to the corr...
just for clarification, i attached a quick sketchup. is this somewhat the topology you had in mind?If so then you should be able to use CAS 2 for the ASA and WAN router. The NAC agents installed in the remote locations should have a discovery host in...
