Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all. I have a AIP-ssm 10 and I created two class-map.. one for inside and one for the outside.. and applyed like the following.policy-map global_policy class inspection_default inspect ftp inspect icmp inspect pptppolicy-map outside-policy clas...
Hi all, i have a IDSM-2 and it's not ywet in production because I need to set the IDSM-2 to just monitor the connection and do not take any action...The module is in the default signatures configuration and some of the active signatures have the TCP ...
Hi all, is there any way to make a NAT with ASA that... catch the port 80 and redirect to a port 8080 in a internal server?I know that with iptables i can do it.. but... with ASA i dont know if its possible... could anyone help me?I have read some po...
Hi all, i would like to know if is it possible to have two link's in one ASA 5510.I need something like it, because i want to have http service in one link and mail server in another link.Is it possible? How can i solve it?Best Regards,Fabio Silva
Thanks for you reply Jose... I understand the situation... and I will make some test and then I tell you about the results.... Do you have some more example of rules from inside to outside... and from outside to inside... if you could send me some ex...
Hi jose, have u solved it? I have the same problem... because the SELF zone can't do inspect of the protocol ssh.... If you have solved it... could you share how u did it?Thanks in advance.Fabio
Hi Giovanni, I have the same problem with some clients. The tunnel is up for some time.. and sometime the tunnel stop forwarding traffic and I need to clear ipsec end isakmp sa. The tunnel is still UP but it can't pass any traffic before I "reset" th...
