Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have ACS 4 on a Windows 2003 box (standalone workgroup) and it needs to talk to the AD in the internal network. We can't add it in as an external DB because the ACS is not part of the internal domain. Thought we might be able to use LDAP?? Has ...
I'm trying to setup a lab to demo CCA for CCA using the OOB Virtual Gateway deployment. Followed all the instructions in the manuals (v4) but they do seem a bit light on with the details for the switch config. I have setup the CAM to manage the LAB...
Campus Manager 4.0.4 - when looking at a subnet with topology services, if the router has a sub-interface it is never drawn as being connected to the switch it is plugged into. Even though it is clearly seen with CDP?? Is this a bug with this versio...
Running CW 2.5.1 with latest updates.CM Topology map is not being populated from RME groups. On some 3750 stacks it shows correctly linked edge switches, but on others it shows nothing. Using Device Manager, some 3750 stacks show cdp neighbours, oth...
Following on from topic "Network Management: LMS 2.5.1 SP4 "Devices for which Inventory has never been collected", I tried to schedule a software job to upgrade some 1200aps to 123-4 code so that I could get the inventory status of them. However LMS...
Just an update on this - the devices were listed in the CM Discovered devices but not in the Collected devices. Deleting the devices from CM & RME, waiting about an hour & then adding them back into RME, then setting the distribution switches as see...
Yes - all network devices are setup in ACS, we use a standard user id for CiscoWorks telnet access, standard SNMP RO & RW strings, & restrict SNMP access to the management servers. The device is in RME, we can collect inventory & configs.Under Devic...
Another thing to watch is that if the time on the switch is too far out from the NTP source, it won't sync at all. You need to manually set the clock on the device close to time on the NTP server.
It would be a big improvement to the product if there was a manual override for this. Afterall, in this case it is just a few revisions of IOS on 1200 AP's making the differenece between RME being able to succesfully get an inventory.For that matter,...
